5 Steps to manage your broken sewer lines

A pipe relining company employee standing outside by a drain

The problem with broken sewer pipes is that you sometimes don’t know that anything is wrong until it’s too late! Damaged sewer drains, pipes and sewer lines tend to wait below the surface, leaving very few signs that something is broken until a drain collapses and your home floods.

As well as being inconvenient, broken and collapsed sewer pipes can cause health concerns, unsightly smells and damage to your yard and property.

If you want to stop damaged drains in their tracks then you need to act fast when you think something might be wrong.

1. Identify the damage

When it comes to recognising damaged plumbing there are a few ways to go about it. Sometimes the problem is obvious because water is seeping from the ground and causing an awful odour.

Other times though, the issue is less obvious so look out for excess moisture, ineffective water flow and a bad flush on your toilet. These can all be telling signs of damaged or blocked pipes. If you can find and inspect the site you might be able to determine the extent of the damage and the appropriate next step.

2. Get cleaning!

If the suspect system is on your property then you might be able to relieve the problem temporarily. Cleaning can enable better water flow while you consult a professional.

You can usually clean your line and shift debris with a garden hose “remember to take the hose fittings off so they don’t get stuck in the pipe”

3. Fix the broken line

If you’re going to repair a broken line you probably think you have to start digging. The problem with pipes is that they’re deep underground, so for most people, excavation equipment or manual digging with a shovel, is the obvious option.

This can work but comes with a few setbacks, mainly that digging, especially with machinery, often does more harm than good. If you’ve got a garden to be proud of, some perfect paving or something similar then you might want to look for a smarter solution.

4. Reline the drain

Although you have a few pipe repair service providers to choose from, a drain relining expert is your best choice.

A pipe relining expert will diagnosis the problem and determine the best method of pipe relining to use for your drain problem.

Pipe relining is a less intrusive, more effective way of repairing your pipes. Your pipe relining expert will insert a special liner into your pipes that will rebuild a new pipe in your old pipe from the inside.

This way, you have the same pipe on the outside, but a brand new reinforced interior that works well and in is guaranteed for 50 years. 

5. Replace your pipes or drains

In the rare circumstances that your pipes can’t be relined by any method, the only way might be to replace them. Our team can come to your location and do what they have to in order to get your system working again. 

Bad pipes can be a problem but there is always a solution. Most of the time, underground no-dig pipe relining is that solution. It is less intrusive, just as effective and far more efficient. Driven by Germany’s innovative Brawoliner pipe relining technology, drain or pipe relining can resolve most of your sewerage problems with less mess.

For broken or blocked sewer drain repairs without the digging, contact the team at The Relining Company today on 04 0487 9929 or please fill out an easy online form.

Back to Top